EpoxAcast® 650 is a mineral filled general purpose casting epoxy resin that is low cost and versatile. It features a low mixed viscosity for minimal bubble entrapment. Choose Fast, Medium or Slow catalyst to fit your project. You can also use HT Hardener to give your castings higher heat resistance.
EpoxAcast® 650 is used for making hard dies for metal stamping as well as patterns and fixtures. It is also used for electrical encapsulation to extend the life cycles and enhance the performance of potted electronic devices. The high compressive strength of EpoxAcast® 650 makes it ideal for making stamping dies for production pressing of metal ornaments.
EpoxAcast 650 Base (Part A) & Hardener (Part B) sold separately. Choose from 101 FAST, 102 MEDIUM, 103 SLOW or HT Hardener
|Epoxacast 650||mixing ratio||pot life||cure time|
|101 fast hardener||100A:12B||20 minutes||1 hour|
|102 medium hardener||100A : 13B||90 minutes||4 hours|
|103 slow hardener||100A : 14B||3,5 hours||24 hours|
|HT high temperature hardener||100A : 10B||3,0 hours||24 Hours followed by: Heat cure for 2 hrs at 175°F/80°C followed by 3 hrs at 300°F/150°C|