EZ-Brush® Vac Bag is a brushable, Platinum-Cure Silicone Rubber developed especially for fabricating reusable vacuum bags by hand. No spray equipment is required. EZ-Brush® Vac Bag Silicone has a 1A:1B by volume mix ratio and is easy to mix and apply. Mixed rubber is thixotropic and can be applied with a brush or spatula to vertical surfaces without sagging.
Production-ready vacuum bags can be fabricated fast using EZ-Brush® Vac Bag Silicone resulting in tremendous time and labor savings. Since bags are reusable, long term material costs are greatly reduced.
Technical bulletin Ez Brush vacuum bagging silicone
|Product Name||A:B mixing Ratio||Demold Time||Elongation at Break||Mixed Viscosity||Pot Life||Shore A Hardness||Tear Strength||Weight cu.inch/lb|
|Easy Brush Vacuum Bagging Silicone||1:1 volume||3.5 hours||364 %||20.000 cps||30 min||20||120 pli||25.7|
Advantages of Silicone Vacuum Bags: Fast – as low as 4 hours from bag fabrication to part production. Cost Effective Production after 8 cycles vs. consumable bags.
Reusable for hundreds of parts with polyester-based resins; upto 50 times with epoxy and 100 times when using pre-preg thermoplastic. Also suitable for de-bulk.
Reduce Labor – silicone bag is reset in minutes; no taping or pleating.
- Self-Releasing, no release agents required.
- Perfect Fit even for complex shapes and undercuts.
- Odorless – No solvents or VOC's.
- High service temperature, up to 464°F / 240°C.
- Built-in Vacuum Seal.
- Ideal for Wet Lay-Up, Infusion, Pre-Preg (in or out of autoclave), and De-Bulk.
One 1-Gallon unit of EZ-Brush Vac Bag Silicone (16 lbs / 7.26 kg) will cover a 15.2 square foot (1.41 sq. meters) area at 3/16" (4.8 mm) thick.
One 5-Gallon unit of EZ-Brush® Vac Bag Silicone (80 lbs / 36.29 kg) will cover a 76.2 square foot (7.05 sq. meters) area at 3/16" (4.8 mm) thick.
- Mixing Beakers
- Measuring Cups & Jars
- Weighting devices
- Protective Gear such as gloves
- Release agents