Show basket (0 Article) My accountShow saved listTo checkout

Platsil Gel & Deadener

Platsil Gel 10 & Platsil Gel 25

Workhorses Platsil Gel 10 & 25 can be found in FX shops around the world

Platsil Gel 10 and Deadner. Platsil Gel 25, Deadner LV and Hardner are both well-known silicone prosthetic systems

Platsil Gel 10 & Deadener

Platsil Gel 10

PlatsilGel 10 Silicone

  • Platsil Gel 10 /1kg

    PlatSil Gel-10 This is the Silicone system used by the worlds top Prosthetic technician, It has been used on recent most of the recent oscar nominated films and has seen success in movies suc...

    38,97 EUR (Price exclusive 21% VAT)

  • Platsil Gel 10 /2kg

    PlatSil Gel-10 This is the Silicone system used by the worlds top Prosthetic technician, It has been used on recent most of the recent oscar nominated films and has seen success in movies suc...

    60,93 EUR (Price exclusive 21% VAT)

  • Platsil Gel 10 /10kg

    PlatSil Gel-10 This is the Silicone system used by the worlds top Prosthetic technician, It has been used on recent most of the recent oscar nominated films and has seen success in movies suc...

    286,20 EUR (Price exclusive 21% VAT)

  • Platsil Gel 10 /36kg set

    PlatSil Gel-10 This is the Silicone system used by the worlds top Prosthetic technician, It has been used on recent most of the recent oscar nominated films and has seen success in movies suc...

    919,28 EUR (Price exclusive 21% VAT)

Deadener

  • Deadener /1kg

    This is the all important Gelling agent for use with Platsil Gel 10, If you are creating a prosthetic part and want to soften it so that it moves like flesh then you will need to Add the Smiths Dea...

    42,07 EUR (Price exclusive 21% VAT)

  • Deadener /5kg

    This is the all important Gelling agent for use with Platsil Gel 10, If you are creating a prosthetic part and want to soften it so that it moves like flesh then you will need to Add the Smiths Dea...

    203,37 EUR (Price exclusive 21% VAT)

  • Deadener /10kg

    This is the all important Gelling agent for use with Platsil Gel 10, If you are creating a prosthetic part and want to soften it so that it moves like flesh then you will need to Add the Smiths Dea...

    404,42 EUR (Price exclusive 21% VAT)

  • Deadener /18kg

    This is the all important Gelling agent for use with Platsil Gel 10, If you are creating a prosthetic part and want to soften it so that it moves like flesh then you will need to Add the Smiths Dea...

    694,37 EUR (Price exclusive 21% VAT)

Platsil Gel 25 & Deadener LV

Platsil Gel 25

Platsil Gel 25 Silicone

  • Platsil Gel 25 /1kg

    Presenting the revolutionary Platsil Gel 25, introduced at IMATS London 2014. Combine with either Deadener LV or Part H Hardener for the most versatile product on the market! Less Inventory, More C...

  • Platsil Gel 25 /2kg

    Presenting the revolutionary Platsil Gel 25, introduced at IMATS London 2014. Combine with either Deadener LV or Part H Hardener for the most versatile product on the market! Less Inventory, More C...

  • Platsil Gel 25 /10kg

    Presenting the revolutionary Platsil Gel 25, introduced at IMATS London 2014. Combine with either Deadener LV or Part H Hardener for the most versatile product on the market! Less Inventory, More C...

  • Platsil Gel 25 /36kg

    Presenting the revolutionary Platsil Gel 25, introduced at IMATS London 2014. Combine with either Deadener LV or Part H Hardener for the most versatile product on the market! Less Inventory, More C...

Deadener LV

  • Deadener LV /1kg

    To soften without oil leaching use Deadener LV (Low Viscosity). Add Deadener to Part A prior to mixing with Part B. Deadener may be added at levels up to 300% of the total mixed weight of A + B. E...

  • Deadener LV /5kg

    To soften without oil leaching use Deadener LV (Low Viscosity). Add Deadener to Part A prior to mixing with Part B. Deadener may be added at levels up to 300% of the total mixed weight of A + B. E...

  • Deadener LV /10kg

    To soften without oil leaching use Deadener LV (Low Viscosity). Add Deadener to Part A prior to mixing with Part B. Deadener may be added at levels up to 300% of the total mixed weight of A + B. E...

  • Deadener LV /18kg

    To soften without oil leaching use Deadener LV (Low Viscosity). Add Deadener to Part A prior to mixing with Part B. Deadener may be added at levels up to 300% of the total mixed weight of A + B. E...

Hardener

  • Platsil Hardener /1kg

    Platsil Part H Hardener can be used to increase the Shore Hardness of any of the Platsil Gels. It also increases working and demold time. For Gel 00, a mix of 1A:1B:1H gives a Shore A10 rubber. For...

  • Platsil Hardener /5kg

    Platsil Part H Hardener can be used to increase the Shore Hardness of any of the Platsil Gels. It also increases working and demold time. For Gel 00, a mix of 1A:1B:1H gives a Shore A10 rubber. For...

  • Platsil Hardener /10kg

    Platsil Part H Hardener can be used to increase the Shore Hardness of any of the Platsil Gels. It also increases working and demold time. For Gel 00, a mix of 1A:1B:1H gives a Shore A10 rubber. For...

  • Platsil Hardener /18kg

    Platsil Part H Hardener can be used to increase the Shore Hardness of any of the Platsil Gels. It also increases working and demold time. For Gel 00, a mix of 1A:1B:1H gives a Shore A10 rubber. For...

Guide

Let us help you find your way.

The list below may help you find what you are looking for via an alternative path.

  • Lifecasting

    everything you need for lifecasting aplications: alginate's, silicones and plaster bandages.

  • Molding

    a range of flexible and rigid moulding materials for moulding all sorts of objects.

  • Casting

    a wide range of flexible and rigid casting materials.

  • Clear Products

    waterclear, translucent or transparant rubbers and plastics for casting and molding.

  • Foam

    liquid flexible and rigid foams, Rigid Foam Blocks, of many types and quantities.

  • Restoration

    materials for restoring in- and exterior ornaments and buildings.

  • Metal / Stone / Wood Fillers

    materials for cold castings; both plastics and metal powders.

  • Brushable Plastics & Coatings

    that can be brushed of sculpted styrene or polyurethane foam.

  • Composites

    Resins and reinforcement for lay-up applicatins. Poyester, epoxy, acrylic resin, glass fibres etc.

  • Epoxy Modelling

    Self hardening two component epoxy putties work like clay but get stone-hard without firing.

  • Performance Resins

    can be used for a variety of projects, but mainly used for industrial (design) applications.

  • Semi Rigids

    urethane casting resins cure quickly to semi-rigid plastics with excellent impact resistance.

  • Accessories

    you might also need; sealers, release agents, tools and more...

  • Support Shells

    these materials are used for mother molds and support shells.

  • Prototyping

    resins and other materials used for rapid prototyping.

Shipping Contact Applications Brands Info New In

FormX - your one stop shop for molding, casting and 3D-Design