Turbine Mixer
Turbine Mixers can be used to mix two-part compounds fast by attaching the mixer to any variable speed drill.
Some Considerations When Working With Turbine Mixers...
~ While mixing two components of a material together using a Turbine Mixer is effective, we still recommend scraping the sides and bottom of the mixing container with a straight-edge spatula to make sure there is no unmixed material left in the mixing container.
~ Using a variable speed drill with a Turbine Mixer attached to blend materials WILL whip air into the mixture. Air in the mixture could yield bubbles in the material after it has fully cured; usually bubbles are not desired. So if using a Turbine Mixer to blend Parts A & B together, it is recommended to Vacuum Degass the mixed material prior to pouring to reduce the amount of air in the rubber.
|
|
(C) 2010 / 2011 - All rights reserved