Acrylic Sealer /5kg

INTRODUCTION

Acrylic Sealer is a pure acrylic coating for AC100. It is durable, flexible, and UV resistant. The
formulation has been improved to make the material more Matt in appearance and easier
to apply by brush or spray. Dependent upon prevailing conditions, products sealed with Acrylic
Sealer will require re-coating at 6 –10 year intervals. It is also compatible with AC300, however it
would not provide the same level of external protection.
Project specific advice can be obtained by calling our technical department +31 20 4182105

APPLICATION

We recommend that two coats of Acrylic Sealer should be applied onto low porosity surfaces such
as AC100, with the first coat being diluted with 10 – 20% water. Diluting the first coat will aid the
chemical bond of the Acrylic Sealer onto the material surface. The second coat is applied once the
first coat is touch-dry. Do not allow first coat to dry completely before applying the second coat. In
principle the application of several thin coats is preferable to one thick coat.
Acrylic Sealer should be applied with a high quality brush or with a clean high quality dense foam
roller evenly across the surface. Ensure that all surfaces are clean, dry, and free from any grease
or oil.

Acrylic Sealer can also be diluted with water and pigmented using Jesmonite Paste Pigments to
create colour washes to add a patina or to age casts.