Release Agents
A release agent (also mold release agent, release coating, or mold release coating) is a chemical used to prevent other materials from bonding to surfaces. It can provide a solution in processes involving mold release.
Release agents provide the critical barrier between a molding surface and the substrate, facilitating separation of the cured part from the mold. Without such a barrier in place, the substrate would become fused to the mold surface, resulting in difficult clean-up and dramatic loss in production efficiency. Even when a release agent is used, factors such as irregular applications or improper release agent choice may have a dramatic effect on the quality and consistency of the finished product
Release Agents for Moldmaking & Casting
We carry a full range of release agents to cover many applications. Aerosols and Non-Aerosol, Solvent Based or Water Based; made especially for Mold Making and Casting.
One Step® Release Agent And Sealer seals and releases porous originals in one step.
Ease Release® Release Agent covers nearly every moldmaking and casting application.
Ease Release® 2831 is a wax-based non-silicone liquid release agent. It has proven to be effective when used to release polyurethane foams.
In & Out® II Water Based Concrete Release Agent is an economical concentrate for releasing concrete castings from Smooth-On rubber molds. Does not affect surface detail of castings. Prolongs mold life.
Universal Mold Release® will release polyurethane mold rubbers from properly prepared models. Not for use with silicones.
And Other release agents such as Acmos 82, PVA, Plaster separator, Royal Jel-E...