gtag('config', 'G-J1B3LVWC4M');

Turbine Mixer

Turbine Mixers can be used to mix two-part compounds fast by attaching the mixer to any variable speed drill.

Some Considerations When Working With Turbine Mixers...

~ While mixing two components of a material together using a Turbine Mixer is effective, we still recommend scraping the sides and bottom of the mixing container with a straight-edge spatula to make sure there is no unmixed material left in the mixing container.

~ Using a variable speed drill with a Turbine Mixer attached to blend materials WILL whip air into the mixture. Air in the mixture could yield bubbles in the material after it has fully cured; usually bubbles are not desired. So if using a Turbine Mixer to blend Parts A & B together, it is recommended to Vacuum Degass the mixed material prior to pouring to reduce the amount of air in the rubber.

 

17,70 EUR

 

incl. 21% VAT excl. transport
Weight: 0.2 kg

 
 
Quantity:   piece