Aphix

Aphix4oz ⓘ EE70D369-35A7-304F-80C5-93D7FD9D5B0E
Adhesives

adhesion promoter for temporary adhesion of surgical tapes, bandages, dressings, and similar items to silicone rubber surfaces.

  • Non-VOC formula
  • Low viscosity liquid
  • Quick drying
  • Removable with NOVOCS™ GLOSS solvent
flame.svg

Danger

H225 - Highly flammable liquid and vapour.
H412 - Harmful to aquatic life with long lasting effects.
€ 36.00

(€ 29.75 without 21% VAT)

In stock

Description

This adhesion promoter is formulated to temporarily adhere surgical tapes, bandages, dressings, and similar items to silicone rubber surfaces, such as those on training mannequins and devices. 

  • It features a non-VOC formula and is a low viscosity liquid that can be easily brushed on and dries quickly. 
  • One application is sufficient for repeated use. 
  • The adhesion promoter can be removed using NOVOCS™ GLOSS silicone solvent.

Instructions

  • Important: Shake the container well before using.
  • Preparation: Clean the silicone surface with NOVOCS™ GLOSS silicone solvent to remove any oils that may affect the bond. Allow the surface to dry for 2 minutes.
  • Application: Apply using a cotton swab, non-latex sponge, or small fine bristle brush. Apply adhesive to the silicone surface and allow it to dry for 10 minutes. It will not work unless it has thoroughly dried. Securely replace the cap after each use as contents will evaporate. Once dried, apply the adhesive surgical tape, bandage, or dressing. One application lasts for repeated use.
  • Removal: Remove using NOVOCS™ GLOSS silicone solvent.
  • Safety: For industrial use only. Keep out of the reach of children. WARNING: Known to the state of CA to cause cancer, birth defects, or reproductive harm - www.P65Warnings.ca.gov

Specifications

Viscosity Low
Dry Time 10 minutes
Available in Adhesives
Product Viscosity Dry Time Color Color Mixed Viscocity Cure Time Pot Life Specific Gravity Mix Ratio By Weight Mix Ratio By Volume Elongation At Break Shore A Hardness Tensile Strength Handling Time Working Time Mixed Viscosity Temperature Range Tear Strength Peel Strength
Aphix Low 10 min. - - - - - - - - - - - - - - - - -
Si-Tac™ - - Translucent Translucent 80,000 cps 6 h. 2.5 h. 1.08 g/cc 1A:1B 1A:1B 550 % 30 - - - - - - -
Sil-Poxy™ Adhesive - - - Translucent - - - 1.12 g/cc - - 750% 40 750 psi 1 h. (73°F/23°C) 5 min. (73°F/23°C) Thick-paste -50°F (-41°C) to 500°F (260°C) 100 ppi 100 ppi
Aphix & Novocs Set - - - - - - - - - - - - - - - - - - -

Why buy at FormX?

Subscribe to our Newsletter

Stay up to date with the latest offers

Visa logo iDeal logo Mastercard logo Paypal logo FedEx logo FedEx logo
This website has been developed by Usecue B.V.
© 2026 FormX B.V.