SO-Strong tints

Buy Smooth-On at FormX

Smooth-On is one of the worlds leading manufaturers 3D modeling materials such as mold-making, casting and special effects materials but also industrial casting resins, adhesives and equipment. FormX is main distributor of Smooth-On products in Europe.

SO-Strong tints

SO-Strong® liquid urethane colorants can be added to any Smooth-On liquid urethane rubber, urethane plastic or urethane foam (do not use with Smooth-On silicones). They can be used to create a variety of color effects for a wide range of material applications. For glowing fluorescent color effects, use Ignite colorants.

The NEW SO-Strong® 9 pack gives you the opportunity to experience each color without spending a lot of money.

SO-Strong® colorants are highly concentrated, offer excellent dispersion and consistent color. A very small amount will color a proportionally large amount of liquid urethane material. The more you add in proportion to the volume of liquid urethane, the more dramatic the color effect. Recommended loading range is .01% to 3% of total system weight. Do not overload the liquid urethane system or cure inhibition / oozing may occur. If this is your first time adding color to a urethane system, it is recommended that you test the color effect by adding a few drops to a small amount of material and observe the outcome.

Technical bulletin SO-Strong colorants

So Strong

SO-Strong Pigments

SO strong white /60ml SO strong white /2oz 23,51 EUR

SO-Stong Black /60ml SO-Stong Black /2oz 23,51 EUR

SO-Strong Blue /60ml SO-Strong Blue /2oz 23,51 EUR

SO-Strong brown /60ml SO-Strong brown /2oz 33,87 EUR

SO-Strong Green /60ml SO-Strong Green /2oz 23,51 EUR

SO-Strong orange /60ml SO-Strong orange /2oz 23,51 EUR

SO-Strong Yellow /60ml SO-Strong Yellow /2oz 23,51 EUR

SO-Strong flesh color /60ml SO-Strong flesh color /2oz 23,51 EUR

SOStrong Red /60ml SOStrong Red /2oz 23,51 EUR

SO-Strong Violet /60ml SO-Strong Violet /2oz 23,51 EUR

SO-Strong Black /500gr SO-Strong Black /16oz 139,11 EUR

Tutorial Video

Instruction

To get you started, we offer the following colorant loading levels. Results may vary.

By Weight Using A Gram Scale: Add SO-Strong®colorant at a ratio of between 0.01% - 3% of the total weight (Parts A + B mixed) of the material being cast. Adding more than 3% by weight may cause cure inhibition.

By Volume Measured In Drops: Add 10 drops of SO Strong® per 3 oz (88 ml) of mixed urethane material. If using a translucent material (like Smooth-Cast® 325) you can use 1 drop to maintain translucency of the material.

Directions For Use: Store and use at 23°C. Wear vinyl gloves to prevent skin contact. After dispensing the required amount of urethane material Parts A and B into measuring containers, add colorant to Part B and mix thoroughly. Combine Parts A and B into a mixing container and mix as directed by the urethane product technical bulletin.

Blending Colors: Combine different colors on a palette to create a custom color before adding to material as directed above.

The Pantone Color Matching System is most commonly used in the printing industry to communicate color. As it relates to Smooth-On color tints and pigments, the represented color is an approximation and people’s interpretation of these colors may vary. The user will determine suitability of a color or combination of colors for the rubber, resin, foam or other product used specifically for their application. Due to the variability in products that are being colored, application, color concentration and other factors, Smooth-On makes no warranty with regards to the color.