gtag('config', 'G-J1B3LVWC4M');

URE-FIL™ 19

URE-FIL™ 19 pure aluminum pellet fillers can be used with Smooth-On® liquid epoxy and urethane resins to improve thermal conductivity, dimensional stability, reduce shrinkage in large mass castings, etc. These fillers can also be used to add evenly distributed weight to metal cold-castings and to create artistic casting effects.

URE-FIL™ 19 are large grain aluminum pellets 1200 micron. Larger grain pellets will not fill areas of high detail as well as the smaller grain pellets but both pellet sizes can be used together for more uniform filling.

Buy Smooth-On at FormX

Smooth-On is one of the worlds leading manufaturers 3D modeling materials such as mold-making, casting and special effects materials but also industrial casting resins, adhesives and equipment. FormX is main distributor of Smooth-On products in Europe.

URE-FIL™ 19

URE-FIL™ 19 Aluminium Pellets 1200 micron /1,81 kg URE-FIL™ 19 Aluminium Pellets 1200 micron /1,81 kg 110,22 EUR

URE-FIL™ 19 Aluminium Pellets 1200 micron /4,54 kg URE-FIL™ 19 Aluminium Pellets 1200 micron /4,54 kg 151,15 EUR

FEATURES

- Can be added to aluminum-filled urethane and epoxy resins for vacuum forming applications to increase thermal conductivity (even heat distribution) when casting parts for applications with higher temperature requirements.
- Will add evenly distributed weight to metal cold-castings to simulate the feel of solid metal reproductions at a reduced expense compared to metal foundry castings.
- Will lower exothermic (heat) temperatures during cure cycle (see chart on reverse side), which reduces the shrinkage rate resulting in improved dimensional stability in large mass castings.
- Can be added to liquid urethane and epoxy resins to create metallic visual effects when used with clear and colored liquid plastics.
- When fully cured, resin filled with URE-FIL™ 17 & 19 can be cut, drilled, turned and machine tooled.
- Should not be used as fillers in RTV rubber products.