gtag('config', 'G-J1B3LVWC4M');

Epoxamite

Epoxy Laminating Resins

Epoxy resins for laminating purposes

Technical bulletin Epoxamite 100

epoxamite slow

EpoxAmite™ 103 /1,16 kg Cure Time 24Hours 54,39 EUR

EpoxAmite™ 103 /4,6 kg Cure Time 24Hours 185,42 EUR

Hardener 103 (slow) /250gr Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:14B by weight Pot Life: 3.5 hours - Cure Time: 24 hours Net Weight : 0.5 Lbs. 25,33 EUR

Hardener 103 (slow) /1,02kg Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:14B by weight Pot Life: 3.5 hours - Cure Time: 24 hours Net Weight : 1,02 kg 73,33 EUR

epoxamite medium

EpoxAmite™ 102 /1,18 kg Cure Time 15Hours 55,03 EUR

EpoxAmite™ 102 /4,67 kg Cure Time 15Hours 173,83 EUR

Hardener 102 (medium) /270gr Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:13B by weight Pot Life: 90 min. - Cure Time: 4 hours Net Weight : 0.5 Lbs. 26,66 EUR

Hardener 102 (medium) /1.04 kg 102 MEDIUM Hardener - When used with EpoxAcast 650: Mix ratio: 100A:13B by weight Pot Life: 90 min. - Cure Time: 4 hours 73,33 EUR

epoxamite fast

EpoxAmite™ 101 /1,13 kg Cure Time 6-8Hours 52,91 EUR

EpoxAmite™ 101 /4,54 kg Cure Time 6-8Hours 170,42 EUR

Hardener 101 (fast) /230gr Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:12B by weight Pot Life: 20 min. - Cure Time: 1 hour Net Weight : 0.5 Lbs. 24,08 EUR

Hardener 101 (fast) / 0,91kg This is the Hardner ONLY for the EpoxAmite System - The FAST version. EpoxAmite 100 Epoxy Laminating System is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication appl... 71,10 EUR

EpoxAmite® 100 Epoxy Laminating System is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication applications. EpoxAmite® 100 Laminating System is unfilled, low in viscosity, odorless and cures at room temperature.
Cured epoxy displays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted. EpoxAmite® 100 Laminating System can be used with reinforcements such as S-Glass, E-Glass, Kevlar and Carbon fibers for lay-up applications or composite parts. EpoxAmite® 100 Resin can also be mixed with fillers such as fumed silica for gel coat applications. Urefil® 3, Urefil® 7 and other fillers can be added for fairing, filleting or bonding applications.

Epoaxamite Dispensing Pump

EpoxAmite® pumps are calibrated to deliver the correct amount of Part A resin and Part B hardener with a single push.

One Push ‘A' + One Push ‘B' = Correct Amount of Product to Mix.

No need to weigh components using a gram scale or measure by volume using graduated cups. Pumps are identified by label on pump head.

Note: These pumps are for EpoxAmite® laminating resins ONLY