gtag('config', 'G-J1B3LVWC4M');

EpoxAcast 650

Epoxacast 650

EpoxAcast® 650 is a mineral filled general purpose casting epoxy resin that is low cost and versatile. It features a low mixed viscosity for minimal bubble entrapment. Choose Fast, Medium or Slow catalyst to fit your project. You can also use HT Hardener to give your castings higher heat resistance.

EpoxAcast® 650 is used for making hard dies for metal stamping as well as patterns and fixtures. It is also used for electrical encapsulation to extend the life cycles and enhance the performance of potted electronic devices. The high compressive strength of EpoxAcast® 650 makes it ideal for making stamping dies for production pressing of metal ornaments.

EpoxAcast 650 Base (Part A) & Hardener (Part B) sold separately. Choose from 101 FAST, 102 MEDIUM, 103 SLOW or HT Hardener

Epoxacast 650 hardener sold seperately

Epoxacast 650 mixing ratio pot life cure time
101 fast hardener 100A:12B 20 minutes 1 hour
102 medium hardener 100A : 13B 90 minutes 4 hours
103 slow hardener 100A : 14B 3,5 hours 24 hours
HT high temperature hardener 100A : 10B 3,0 hours 24 Hours followed by: Heat cure for 2 hrs at 175°F/80°C followed by 3 hrs at 300°F/150°C

epoxacast 650

Epoxacast 650 /1,36kg a mineral filled general purpose casting epoxy that is low cost. It features a low mixed viscosity for minimal bubble entrapment. N.B. Hardener sold seperately: Epoxacat 101 (fast), -102 (medium) or -103 (slow) 34,78 EUR

Epoxacast 650 /5,44 kg a mineral filled general purpose casting epoxy that is low cost. It features a low mixed viscosity for minimal bubble entrapment. N.B. Hardener sold seperately: Epoxacat 101 (fast), -102 (medium) or -103 (slow) 115,14 EUR

Epoxacast Hardeners

Hardener 101 (fast) /230gr Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:12B by weight Pot Life: 20 min. - Cure Time: 1 hour Net Weight : 0.5 Lbs. 24,08 EUR

Hardener 101 (fast) / 0,91kg This is the Hardner ONLY for the EpoxAmite System - The FAST version. EpoxAmite 100 Epoxy Laminating System is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication appl... 71,10 EUR

Hardener 102 (medium) /270gr Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:13B by weight Pot Life: 90 min. - Cure Time: 4 hours Net Weight : 0.5 Lbs. 26,66 EUR

Hardener 102 (medium) /1.04 kg 102 MEDIUM Hardener - When used with EpoxAcast 650: Mix ratio: 100A:13B by weight Pot Life: 90 min. - Cure Time: 4 hours 73,33 EUR

Hardener 103 (slow) /250gr Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:14B by weight Pot Life: 3.5 hours - Cure Time: 24 hours Net Weight : 0.5 Lbs. 25,33 EUR

Hardener 103 (slow) /1,02kg Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:14B by weight Pot Life: 3.5 hours - Cure Time: 24 hours Net Weight : 1,02 kg 73,33 EUR