Ease Release™ 400 /340 gr

Ease Release™ 400 (Aerosol) is a highly efficient release agent designed to release polyurethane elastomers, Thiokol rubbers, EPDM and other synthetic elastomers from aluminum, chrome, epoxy, polyester, rubber and steel molds.

Features:

Ease Release™ 400 is easy to apply, fast drying and effective over a broad temperature range from 21°C to 260°C.
Ease Release™ 400 provides excellent release and surface finish to molded parts. Ease Release™ 400 also provides multiple release in many instances. Precise duplication of mold detail and dimension with minimum mold maintenance and down time resulting in greater productivity

1 - Thoroughly clean your mold with a suitable cleaner to remove all traces of previous coating and oils.
2 - Apply Ease Release 305 using aerosol spray for bulk grades. Hold the can or spray gun 15 to 20 cm from the mold surface to ensure a light even coating. When the molds are new or have been blasted with an abrasive “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release 300 before regular molding.
3 - Ease Release 305 is fast drying and requires no baking during the normal molding process.
4 - Reapply a light coating before each molding.