Ease Release™ 500 /340 gr

Ease Release™ 500 is a TEFLON™-like dry film mold release (and dry lubricant) that contains no silicones, oils or wax. Ease Release 500 is non-migrating and non-staining. It is effective and improves efficiency in many molding processes including injection, compression, transfer, vacuum form and die cast molding.

Features:
- Fast drying
- Effective over a broad temperature range from 21°C to 204°C
- Easy to apply
- Non staining, non migrating
- Inert with outstanding thermal and chemical stability
- Ease Release 500 provides:

Excellent release
- Matte surface finish on molded parts
- Ease of post finishing molded parts

Processing Using Metal Molds

1 - Thoroughly clean your mold with a suitable cleaner to remove all traces of previous coating and oils.
2 - Apply Ease Release 500 using aerosol spray for bulk grades. Hold the can or spray gun 6 to 8 inches from the mold surface to ensure a light even coating. When the molds are new or have been blasted with an abrasive, “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release 500 before regular molding.
3 -Ease Release 500 is fast drying and requires no baking during the normal molding process.
4 - Reapply a light coating before each molding.

CAUTION: Heating this product to temperatures above 500°F will create fumes that can cause flu like systems. Use with adequate ventilation.