NOVOCS™ Matte
Buy Smooth-On at FormX
Smooth-On is one of the worlds leading manufaturers 3D modeling materials such as mold-making, casting and special effects materials but also industrial casting resins, adhesives and equipment. FormX is main distributor of Smooth-On products in Europe.
NOVOCS™ solvents are low viscosity silicone solvents that evaporate quickly. NOVOCS™ is particulary useful in thinning down Psycho Paint® silicone paint base to apply via brush or airbrush to cured platinum silicone rubber props and prosthetics. When used as a solvent for thinning silicone paints or surface coatings, NOVOCS™ Matte will leave a matte finish.
WARNING - FLAMMABLE Liquid and vapor. Keep away from ignition sources and follow precautions for handling flammables.
- Read the safety information label. Click on the image
- Lees het veiligheidsinformatie label. Klik op de afbeelding.
- Lesen Sie das Sicherheitsinformationsetikett. Klicken Sie auf das Bild.
- Lisez les informations de sécurité cliquez sur l'image
- Lea la etiqueta de información de seguridad. Haga clic en la imagen
- NOVOCS™ solvents do not contain VOCs.
- NOVOCS™ solvents are low viscosity silicone solvents that evaporate quickly.
- NOVOCS™ Matte leaves a matte finish.
Important - Shake the NOVOCS™ container well before use.
Materials should be stored and used in a warm environment of 23°C. This material has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize the risk of contamination.
Mix the A and B components of two-component silicone systems before adding NOVOCS™. Add the desired amount of NOVOCS™ solvent to create a thinner silicone mixture that can be brushed or airbrushed onto the surface of a cured silicone casting.
Example recommended proportions for use:
When added to Psycho Paint, add between 200%-400% NOVOCS™ solvent by weight
When adding to Sil-Poxy, add between 300%-500% NOVOCS™ solvent by weight
Because no two applications are alike, a small test application is recommended to determine suitability for your project if the performance of this material is compromised.