NOVOCS™ solvents are low viscosity silicone solvents that evaporate quickly. NOVOCS™ is particulary useful in thinning down Psycho Paint® silicone paint base to apply via brush or airbrush to cured platinum silicone rubber props and prosthetics. When used as a solvent for thinning silicone paints or surface coatings, NOVOCS™ Matte will leave a matte finish.
WARNING - FLAMMABLE Liquid and vapor. Keep away from ignition sources and follow precautions for handling flammables.
- NOVOCS™ solvents contain no VOC’s.
- NOVOCS™ solvents are low viscosity silicone solvents that evaporate quickly.
- NOVOCS™ Matte leaves a matte finish.
Important - Shake NOVOCS™ Container Well Before Using.
Materials should be stored and used in a warm environment 23°C. This material has a limited shelf life and should be used as soon as possible. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Mix the A and B components of two component silicone sytems before adding NOVOCS™. Add the desired proportion of NOVOCS™ solvent to create a thinner silicone mixture which can be brushed or airbrushed onto the surface of a cured silicone casting.
Example Recommended Ratios For Use:
When adding to Psycho Paint, add between 200%-400% NOVOCS™ solvent by weight
When adding to Sil-Poxy, add between 300%-500% NOVOCS™ solvent by weight
Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.
Let us help you find your way.
The list below may help you find what you are looking for via an alternative path.