gtag('config', 'G-J1B3LVWC4M');
Show basket (0 Article) My accountTo checkout

EZ Spray system

Buy Smooth-On at FormX

Smooth-On is one of the worlds leading manufaturers 3D modeling materials such as mold-making, casting and special effects materials but also industrial casting resins, adhesives and equipment. FormX is main distributor of Smooth-On products in Europe.

EZ-Spray Jr. Systeem

EZ-Spray Jr. Spray Gun - The EZ-Spray Jr. is a versatile, convenient and easy-to-use spray system for spraying moldmaking and casting materials.

Technical bulletin EZ-Spray 20 silicone
Technical bulletin EZ-Spray 35 silicone
Technical bulletin EZ-Spray Plastic
Technical bulletin EZ-Spray 45 Urethane rubber
Technical bulletin EZ-Spray Foam Sprayable Rigid Foam
Technical bulletin EZ-Spray Styrocoat

EZ-Spray Jr.

Gun

EZ-Spray 20 & 35

Ez-spray silicone 20 & 35

  • EZ-Spray silicone 20 Rubber /8,5kg

    EZ-Spray silicone 20 Rubber / 5 Cartridge unit + 5mixers / (750mlA+750mlB/cartridge), Set = 8,5kg.

    502,46 EUR

  • EZ-Spray silicone 35 Rubber /8,5kg

    EZ-Spray silicone 35 Rubber / 5 Cartridge unit + 5mixers / (750mlA+750mlB/cartridge), Set = 8,5kg.

    390,60 EUR

EZ-Spray 20 Silicone

EZ~Spray® Silicone 20 is a sprayable silicone that cures quickly to a soft rubber with high elongation and tear strength. Liquid silicone is sprayed through the EZ~Spray® Junior Cartridge System which is an economical alternative to expensive spray equipment. After a suitable spray thickness is attained, EZ~Spray® Silicone 20 cures in about 10 minutes with negligible shrinkage to a strong, durable mold rubber good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.

EZ~Spray® Silicone 20 is effective at making fast, cost effective vacuum bags for producing composite parts. Newly sprayed or injected bags can be removed from the mold in 10 minutes and used immediately in production with polyester or epoxy resin systems. The advantage that EZ~Spray® Silicone 20 offers vs. conventional vacuum bagging systems is the speed at which a production-ready silicone bags can be made resulting in significant time and labor savings.Yield - Each cartridge contains 3.75 lbs. (1.7 kgs) of material. Assuming a thickness of 3/8 inches (0.95 cm), one cartridge of EZ~Spray® Silicone 20 will cover approximately 1.66 sq. ft. (0.15 square meters).

EZ-Spray Silicone 35

EZ-Spray 35 Silicone is a sprayable polyadditive silicone system with a very fast processing cycle. The silicone is cured after one hour with a shore value of A35. This rubber is suitable for casting synthetic resins, foams, plaster, cement / concrete mortars, etc.

EZ- Spray plastic & Styrocoat

EZ- Spray plastic & Styrocoat

  • EZ-Spray™ Styrocoat™ /5,2 kg

    EZ-Spray™ Styrocoat™ /5,2 kg

    216,40 EUR

EZ-Spray Rigid Foam

EZ-Spray Rigid Foam

  • EZ-Spray Rigid Foam /5,2kg

    EZ-Spray Rigid Foam 5,2 kg(3x carttridge unit +4mixers +2flow restrictors (1,75/cartridge))

    216,40 EUR

EZSpray accessoires

EZ-Spray accessoires

  • EZ-Spray gun

    EZ-Spray gun

    1.443,05 EUR

  • EZ-Spray jr. Mixer/Nozzle large

    Bag of 10

    140,19 EUR

  • EZ-Spray Mixer/ Nozzle small

    Bag of 10

    73,10 EUR

  • EZ-Spray Mixer Adapter

    EZ-Spray Mixer Adapter

    24,84 EUR

  • EZ-Spray static mixing tubes large

    Bag of 10

    36,46 EUR

  • EZ-Spray static mixing tubes small

    Bag of 10

    63,53 EUR

  • EZ-Spray Flow Restrictors

    Bag of 10

    10,54 EUR

Guide

Let us help you find your way.

The list below may help you find what you are looking for via an alternative path.

  • Molding

    flexible and rigid molding for all sorts of objects.

  • Casting

    a wide range of flexible and rigid casting materials.

  • Special Properties

  • Composites

    resins, poyester, epoxy, acrylic resin, glass fibres etc.

  • Foam

    expanding flexible and rigid foams, rigid blocks.

  • Restoration

    restoring in- and exterior ornaments and buildings.

  • Prototyping

    resins and other materials used for rapid prototyping.

  • Textile

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

FormX Newsletter About us Contact Shipping Applications we have vacancies Terms of Sale

Wir verwenden Cookies um unsere Website zu optimieren und Ihnen das bestmögliche Online-Erlebnis zu bieten. Mit dem Klick auf "Alle akzeptieren" erklären Sie sich damit einverstanden. Erweiterte Einstellungen