EpoxAcast 650

Epoxacast 650

EpoxAcast® 650 is a mineral filled general purpose casting epoxy resin that is low cost and versatile. It features a low mixed viscosity for minimal bubble entrapment. Choose Fast, Medium or Slow catalyst to fit your project. You can also use HT Hardener to give your castings higher heat resistance.

EpoxAcast® 650 is used for making hard dies for metal stamping as well as patterns and fixtures. It is also used for electrical encapsulation to extend the life cycles and enhance the performance of potted electronic devices. The high compressive strength of EpoxAcast® 650 makes it ideal for making stamping dies for production pressing of metal ornaments.

EpoxAcast 650 Base (Part A) & Hardener (Part B) sold separately. Choose from 101 FAST, 102 MEDIUM, 103 SLOW or HT Hardener

Epoxacast 650 hardener sold seperately

Epoxacast 650	mixing ratio	pot life	cure time
101 fast hardener	100A:12B	20 minutes	1 hour
102 medium hardener	100A : 13B	90 minutes	4 hours
103 slow hardener	100A : 14B	3,5 hours	24 hours
HT high temperature hardener	100A : 10B	3,0 hours	24 Hours followed by: Heat cure for 2 hrs at 175°F/80°C followed by 3 hrs at 300°F/150°C

epoxacast 650

Epoxacast 650 /1,36kg

a mineral filled general purpose casting epoxy that is low cost. It features a low mixed viscosity for minimal bubble entrapment. N.B. Hardener sold seperately: Epoxacat 101 (fast), -102 (medium) or -103 (slow)

34,78 EUR

Action was successful

That unfortunately did not work.

Show basket To checkout Continue shopping.

Epoxacast 650 /5,44 kg

a mineral filled general purpose casting epoxy that is low cost. It features a low mixed viscosity for minimal bubble entrapment. N.B. Hardener sold seperately: Epoxacat 101 (fast), -102 (medium) or -103 (slow)

115,14 EUR

Epoxacast Hardeners

Hardener 101 (fast) /230gr

Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:12B by weight Pot Life: 20 min. - Cure Time: 1 hour Net Weight : 0.5 Lbs.

24,08 EUR
Hardener 101 (fast) / 0,91kg

This is the Hardner ONLY for the EpoxAmite System - The FAST version. EpoxAmite 100 Epoxy Laminating System is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication appl...

71,10 EUR

Hardener 102 (medium) /270gr

Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:13B by weight Pot Life: 90 min. - Cure Time: 4 hours Net Weight : 0.5 Lbs.

26,66 EUR
Hardener 102 (medium) /1.04 kg

102 MEDIUM Hardener - When used with EpoxAcast 650: Mix ratio: 100A:13B by weight Pot Life: 90 min. - Cure Time: 4 hours

73,33 EUR

Hardener 103 (slow) /250gr

Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:14B by weight Pot Life: 3.5 hours - Cure Time: 24 hours Net Weight : 0.5 Lbs.

25,33 EUR
Hardener 103 (slow) /1,02kg

Trial Size PART B ONLY When used with EpoxAcast 650: Mix ratio: 100A:14B by weight Pot Life: 3.5 hours - Cure Time: 24 hours Net Weight : 1,02 kg

73,33 EUR

B2C prices inc. VAT

SMOOTH-ON is one of the worlds leading manufacturers of 3D modeling materials for mold-making, casting and special effects.

FormX is a main distributor of SMOOTH-ON in Europe with a wide range of products always on stock. We put great emphasis on customer service and supply many satisfied clients throughout Europe.

Be a happy client - don't just buy anything, anywhere - buy SMOOTH-ON AT FORMX !

- BEST PRODUCT
- BEST PRICE
- BEST SERVICE

Now €15.- discount on all orders above net €250.-

Manage your expenses with our Euro 15,- discount on all orders above net Euro 250.-
The discount will be applied at check-out, you will see the discount on your balance after choosing your payment option.

(only available through our webshop, net amount = invoice amount minus VAT minus transport costs, where VAT = the standard VAT rate of your country)

www.formx.biz

B2B only

- pricing ex VAT
- invoicing ex VAT
- widest product range
- volume discounts

Valid VAT-number required

Info

Navigate

Applications

FormX Academy

FormX Academy

Our new FormX Academy gives you the opportunity to learn from professionals. Artists, model makers and designers will teach you beginners-, intermediary- and advanced skills. Klick on the link for our programm..

Optional Login

Facebook

FormX Newsletter About us Contact Shipping Applications we have vacancies Terms of Sale